Polymer Flooring

Polymer Flooring

There are many chemistries and types of polymer floor coatings and materials. In addition, there are many types of floor systems from simple coatings to complex systems that may be more than 1/2″ thick. Decorative, functional, or both, we’ll help you figure out what you need.

BondTite 1101

BondTite 1101 is a 100% solids, Low Modulus, two-component, AHC (Advanced Hybrid Cycloaliphatic) epoxy primer which exhibits excellent adhesion and sealing properties on steel or concrete. The coating’s uses include priming of concrete floors, manholes, sumps, and other areas in preparation for over-coating. BondTite 1101 can also be used as a clear sealer, but will…
Read more

Posted in Aquatic Environments, BondTite, Polymer Flooring, Resins for Composites, Secondary Containment Coatings and Linings | Tagged , , , , , , , , | Comments Off on BondTite 1101

BondTite 1114

BondTite 1114 is a 100% solids, two-component Fluoropolymer-Modified AAP (Advanced Aliphatic Polyamine) epoxy adhesive and coating which exhibits excellent adhesive properties on many substrates. BondTite 1114 has been designed to have moderate viscosity to provide excellent wetting properties during cloth lay-up in tank lining applications. BondTite 1114 has also been flexibilized to reduce coating stresses…
Read more

Posted in Adhesives, BondTite, Chemical Storage Tanks, Polymer Flooring, Resins for Composites, Secondary Containment Coatings and Linings | Tagged , , , , | Comments Off on BondTite 1114

BondTite 1501

BondTite 1501 Primer is a unique three-component, Water-Reducible epoxy Primer. It can be applied to properly designed green concrete well within the typical 28 day curing period. When applied to concrete within 12 hours of the pour, it eliminates the need to shotblast and allows coating of the concrete the next day with a properly…
Read more

Posted in BondTite, Polymer Flooring, Secondary Containment Coatings and Linings, Specialty Coatings | Tagged , , | Comments Off on BondTite 1501

BondTite 1503

BondTite 1503 Primer is a unique three-component, Water-Reducible epoxy Primer and Bond Enhancer. This is accomplished by superior penetration and adhesion to the concrete slab. The coating’s uses include the priming of floors, manholes, sumps, and other concrete areas. BondTite 1503 has also has shown the ability to reduced moisture transmission in concrete slabs. Although,…
Read more

Posted in Aquatic Environments, BondTite, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Comments Off on BondTite 1503

ChemShield 1185

ChemShield 1185 is a thick-film, 100% solids reinforced, propriety formulated epoxy-based internal lining designed for corrosion control, restoration, and leak prevention of petroleum storage tank bottoms. ChemShield 1185 is spray-applied from 15-125 mils DFT depending on the extent of bottom plate corrosion, and is flexibilized to reduce coating stress resulting from mechanical and physical forces…
Read more

Posted in Chemical Storage Tanks, ChemShield, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Comments Off on ChemShield 1185

ChemShield 1731

ChemShield 1731 is a sprayable, high functionality, 100% solids, A.H.C. (Advanced Hybrid Cycloaliphatic) Phenolic Novolac Lining which exhibits excellent resistance to a broad range of chemicals, including various concentrations of solvents, caustics, dilute organic acids, and inorganic acids. The integration of flakeglass reinforcement gives the coating excellent resistance to permeation, good abrasion resistance, and resistance…
Read more

Posted in Chemical Storage Tanks, ChemShield, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , , | Comments Off on ChemShield 1731

ChemShield 1734

ChemShield 1734 is a sprayable, 100% solids, amine cured novolac epoxy lining which exhibits excellent resistance to organic solvents, caustic environments, and dilute acidic exposures.  The integration of flakeglass reinforcements also gives the coating excellent resistance to permeation and very good abrasion resistance.  ChemShield 1734 is well suited for sewage pipe, clean rooms, treatment plants,…
Read more

Posted in ChemShield, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , | Comments Off on ChemShield 1734

ChemShield 1737

ChemShield 1737 is a thick-film, internally reinforced 100% solids Glass Flake Filled, AHC High Functionality Phenolic Novolac based internal lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. This proprietary formulated lining may also be used for restoration and leak prevention of petroleum storage…
Read more

Posted in Chemical Storage Tanks, ChemShield, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Comments Off on ChemShield 1737

ChemShield 1743

ChemShield 1743 is a thick-film, 100% solids reinforced, proprietary formulated phenolic-based internal lining designed for corrosion control and abrasion resistance in chemical plants, and any other areas requiring excellent chemical resistance in immersion conditions. ChemShield 1743 may also be used for restoration and leak prevention of petroleum storage tank bottoms and pipelines where resistance to…
Read more

Posted in Chemical Storage Tanks, ChemShield, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Comments Off on ChemShield 1743

ChemShield 1787

ChemShield 1787 is a sprayable, 100% solids, high functionality, A.H.C. (Advanced Hybrid Cycloaliphatic) Phenolic Novolac Epoxy lining which exhibits excellent resistance to organic solvents, Chlorinated solvents and compounds, caustic environments, and acidic exposures. ChemShield 1787 is well suited for sewage pipe, treatment plants, petroleum refining and storage, and chemical plants. General Brochure Technical Data Sheet…
Read more

Posted in Chemical Storage Tanks, ChemShield, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Comments Off on ChemShield 1787

ChemShield 1810 (Renamed to ChemShield 1710)

ChemShield 1810 was renamed to ChemShield 1710. Please see ChemShield 1710 (www.wolverinecoatings.com/chemshield-1710/). In addition, and Antimicrobial version is now available as ChemShield 1710AM (www.wolverinecoatings.com/chemshield-1710AM/). General Product Brochure (GPB) Technical Data Sheet (TDS) Safety Data Sheet (SDS) Part A Safety Data Sheet (SDS) Part B Architectural Specification APPLICATION DATA SUMMARY See Application Instructions for complete information…
Read more

Posted in ChemShield, Polymer Flooring, Resins for Composites, Secondary Containment Coatings and Linings | Tagged , , | Comments Off on ChemShield 1810 (Renamed to ChemShield 1710)

ChemShield 1837

ChemShield 1837 is a thick-film, internally reinforced 100% solids Glass Flake Filled, AHC High Functionality Phenolic Novolac based internal lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. This proprietary formulated lining may also be used for restoration and leak prevention of petroleum storage…
Read more

Posted in Chemical Storage Tanks, ChemShield, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Leave a comment

ChemShield 1887

ChemShield 1887 is a sprayable, 100% solids, high functionality, A.H.C. (Advanced Hybrid Cycloaliphatic) Phenolic Novolac Epoxy lining which exhibits excellent resistance to organic solvents, Chlorinated solvents and compounds, caustic environments, and acidic exposures. ChemShield 1887 is well suited for sewage pipe, treatment plants, petroleum refining and storage, and chemical plants. General Brochure Technical Data Sheet…
Read more

Posted in Chemical Storage Tanks, ChemShield, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Comments Off on ChemShield 1887

ChemShield 5201

ChemShield 5201 is a high performance coating which is rapid curing and chemical resistant for protection against general chemical exposures and immersion service. ChemShield 5201 utilizes unique polyester technology, offering impermeability, short application time, and high abrasion resistance for maximum performance. With special additives, ChemShield 5201 can be applied in temperatures as low as -30oF…
Read more

Posted in Chemical Storage Tanks, ChemShield, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , | Leave a comment

ChemShield 5252

ChemShield 5252 is a high performance, high build coating which is rapid curing and chemical resistant for protection against general chemical exposures and immersion service. ChemShield 5252 utilizes unique polyester technology, offering impermeability, short application time, and high abrasion resistance for maximum performance. With special additives, ChemShield 5252 can be applied in temperatures as low…
Read more

Posted in Chemical Storage Tanks, ChemShield, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , | Leave a comment

EnduraShield 2254

EnduraShield 2254 is a High Solids two component aliphatic clear gloss hybrid urethane applied over an epoxy primer or used to recoat and existing epoxy or urethane floor. Adding WearResist 105 additive will give a satin finish, increase the coefficient of friction (slip resistance), and increase abrasion resistance further. Adding SpheriTex 110 additive will increase…
Read more

Posted in EnduraShield, Polymer Flooring | Tagged , | Comments Off on EnduraShield 2254

HybriShield 2401

HybriShield 2401 is a High Solids, two component, clear, gloss, Liquid Polycarbonate, hybrid polymer. It can be applied over an epoxy primer/basecoat or used to recoat an existing epoxy or urethane floor. Adding WearResist 105 additive will give a satin finish, increase the coefficient of friction (slip resistance), and increase abrasion resistance further. Adding SpheriTex…
Read more

Posted in Aquatic Environments, HybriShield, Polymer Flooring | Tagged , | Comments Off on HybriShield 2401

LiquaTile 1122

LiquaTile 1122 is a 100% solids, high build, epoxy Anti-Static resin formulated to impart electrostatic control properties. LiquaTile 1122 is supplied with a fast setting chemical resistant cycloaliphatic curing agent which inhibits surface yellowing. This product produces a gloss finish with a slight stipple texture. LiquaTile 1122 can be installed in many environments where the…
Read more

Posted in LiquaTile, Polymer Flooring, Secondary Containment Coatings and Linings, Specialty Coatings | Tagged , , | Leave a comment

LiquaTile 1143

LiquaTile 1143 is a 100% solids, AHC (Advanced Hybrid Cycloaliphatic) amine-cured self leveling epoxy floor coating which exhibits excellent resistance to organic solvents, caustic environments, and dilute acidic exposures while also displaying outstanding mechanical properties, such as adhesion and abrasion resistance. It is a full ceramic version of LiquaTile 1184. LiquaTile Epoxy Floor Coatings are…
Read more

Posted in LiquaTile, Pipe and Pipelines, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , , | Comments Off on LiquaTile 1143

LiquaTile 1184

LiquaTile 1184 TopCoat is a 100% solids, amine-cured self leveling epoxy floor coating which exhibits excellent resistance to organic solvents, caustic environments, and dilute acidic exposures while also displaying outstanding mechanical properties, such as adhesion and abrasion resistance. LiquaTile Epoxy Floor Coatings are designed for concrete service such as warehouse flooring and machine pads. General…
Read more

Posted in LiquaTile, Polymer Flooring, Secondary Containment Coatings and Linings | Tagged , , | Comments Off on LiquaTile 1184

Polymer Flooring Products for DIY or Residential Use

Every day we take dozens of calls from Home Owners, General Contractors, and Do-It-Yourself customers looking for garage flooring solutions to improve the value of their homes and properties with our Polymer Coatings Systems. We don’t sell to this market but we are happy to refer you to AlphaGarage.com who sells to the DIY and…
Read more

Posted in AcryliSeal, AcryliStone, AcryliTex, Adhesives, Anti-Corrosives, AntiCor, Applications, Aquatic Environments, BondTite, CeramiWear, Chemical Storage Tanks, ChemShield, ColorMeld, ColorQuartz, CoveEase, DecoFlakes, Dispersions and Colorants, DuraTred, EnduraShield, EnduraTred, FatEater, FlashPatch, Highlands, HybriShield, IllumiFlakes, IllumiFlect, IntegraFlex, LineGevity, LiquaLevel, LiquaTex, LiquaTile, MetallicFX, News, OilEater, OrganiClean, OrganiPrep, OrganiStrip, OrganiWash, Our Brands, Pipe and Pipelines, Polymer Flooring, ProtoCoat, Resins for Composites, RestoraClean, Secondary Containment Coatings and Linings, Silencer, Specialty Coatings, SpheriTex, StaticShield, StripQuik, SuperGrip, Thickener, TitanTrowel, Toll Manufacturing, TrowelEase, TrowelSand, VersaFloor, VersaGel, VersaHard, VersaRez, VitraPrime | Tagged | Leave a comment

Products for Polymer Flooring

Products for Polymer Flooring   Polymer Flooring Workhorse Products        

Posted in News, Polymer Flooring | Tagged | Leave a comment

TrowelEase 1162 PK

TrowelEase 1162 PK is a three-component patching kit used to repair concrete. Specifically, it is used for epoxy overlays, repairing spalled concrete (holes), and resurfacing old or damaged concrete. TrowelEase 1162PK uses a special blend of engineered quartz silica aggregate and a two-component epoxy binder that provides a high-strength, easy to work with mortar. TrowelEase…
Read more

Posted in Polymer Flooring, Secondary Containment Coatings and Linings, TrowelEase, TrowelSand | Tagged , | Leave a comment

TrowelSand 211

TrowelSand 211 is an economical aggregate for resinous mortar systems.  It is a blend of fine quartz sands.  It is typically combined with TrowelSand 271 to achieve a trowelable mix. General Brochure Technical Data Sheet (TDS) Safety Data Sheet (SDS) Architectural Specs APPLICATION DATA SUMMARY TrowelSand 211 is mixed into resinous systems as indicated in…
Read more

Posted in Polymer Flooring, Secondary Containment Coatings and Linings, TrowelSand | Tagged , | Leave a comment

TrowelSand 245

TrowelSand 245 is a premium aggregate for resinous mortar systems.  It is a blend of various size quartz sands and troweling aides, yielding an easily troweled system, which compacts tightly for a stronger, more aesthetically pleasing appearance. General Brochure Technical Data Sheet (TDS) Safety Data Sheet (SDS) Architectural Specs APPLICATION DATA SUMMARY TrowelSand 245 is…
Read more

Posted in Polymer Flooring, Secondary Containment Coatings and Linings, TrowelSand | Tagged , | Leave a comment

TrowelSand 250

TrowelSand 250 is a pre-blended, economical aggregate for resinous mortar systems.  It is a blend of 2 parts TrowelSand 211 to 1 part TrowelSand 271. General Brochure Technical Data Sheet (TDS) Safety Data Sheet (SDS) Architectural Specs APPLICATION DATA SUMMARY TrowelSand 250 is mixed into resinous systems as indicated in the Technical Data Sheet for…
Read more

Posted in Polymer Flooring, Secondary Containment Coatings and Linings, TrowelSand | Tagged , | Leave a comment

TrowelSand 271

TrowelSand 271 is an economical aggregate for resinous mortar systems.  It is a blend of extra fine quartz sands.  It is typically combined with TrowelSand 211 to achieve a trowelable mix. General Brochure Technical Data Sheet (TDS) Safety Data Sheet (SDS) Architectural Specs APPLICATION DATA SUMMARY TrowelSand 271 is mixed into resinous systems as indicated…
Read more

Posted in Polymer Flooring, Secondary Containment Coatings and Linings, TrowelSand | Tagged , | Leave a comment

VersaHard 9504

VersaHard 9504 We are working on this section of our website. We should have this information published very soon. General Product Brochure (GPB) Technical Data Sheet (TDS) Safety Data Sheet (SDS) Architectural Specification APPLICATION DATA SUMMARY See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions…
Read more

Posted in Adhesives, Polymer Flooring, Resins for Composites, VersaHard | Tagged , , | Comments Off on VersaHard 9504

VersaRez 9100

VersaRez 9100 is an undiluted standard (difunctional) Epoxy Resin based on the reaction of Bisphenol A and Epichlorohydrin. VersaRez 9100 can be crosslinked with appropriate curing agents (hardeners) to produce desired properties such as chemical resistance, adhesive, Tg, and/or mechanical properties. VersaRez 9100 is a very high quality, high purity, and low color (Clear) Epoxy…
Read more

Posted in Adhesives, Chemical Storage Tanks, Pipe and Pipelines, Polymer Flooring, Resins for Composites, Secondary Containment Coatings and Linings, VersaRez | Tagged , , , , , | Comments Off on VersaRez 9100

get_template_directory_uri();

Polymer Flooring - Wolverine Coatings Corporation: Coatings Manufacturer, Spartanburg, SC