BondTite 1101 is a 100% solids, Low Modulus, two-component, AHC (Advanced Hybrid Cycloaliphatic) epoxy primer which exhibits excellent adhesion and sealing properties on steel or concrete. The coating’s uses include priming of concrete floors, manholes, sumps, and other areas in preparation for over-coating. BondTite 1101 can also be used as a clear sealer, but will yellow under sunlight. In addition to the Standard Cure formulation, BondTite 1101 is also available in an Extended pot life formulation (BondTite 1101-EP).
|General Product Brochure (GPB)|
|Technical Data Sheet (TDS)|
|Safety Data Sheet (SDS) Part A|
|Safety Data Sheet (SDS) Part B|
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
Read the Material Safety Data sheet carefully before use. Safety precautions in the MSDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.