Category: Pipe and Pipelines

ChemShield 1713

ChemShield 1713 (Formerly ChemShield 1813) is a sprayable, 100% solids, high functionality, A.H.C. (Advanced Hybrid Cycloaliphatic) Phenolic Novolac Epoxy polymer which exhibits excellent resistance to organic solvents, Chlorinated solvents and compounds, caustic environments, and acidic exposures. ChemShield 1713 is a low viscosity formulation designed for wetting out fiberglass, carbon-fiber and for other composite applications. ChemShield…
Read more


2016-12-16 0

ChemShield 1737

ChemShield 1737 is a thick-film, internally reinforced 100% solids Glass Flake Filled, AHC High Functionality Phenolic Novolac based internal lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. This proprietary formulated lining may also be used for restoration and leak prevention of petroleum storage…
Read more


2016-09-19 0

ChemShield 1743

ChemShield 1743 is a thick-film, 100% solids reinforced, proprietary formulated phenolic-based internal lining designed for corrosion control and abrasion resistance in chemical plants, and any other areas requiring excellent chemical resistance in immersion conditions. ChemShield 1743 may also be used for restoration and leak prevention of petroleum storage tank bottoms and pipelines where resistance to…
Read more


2016-06-22 0

VersaRez 9100

VersaRez 9100 is an undiluted standard (difunctional) Epoxy Resin based on the reaction of Bisphenol A and Epichlorohydrin. VersaRez 9100 can be crosslinked with appropriate curing agents (hardeners) to produce desired properties such as chemical resistance, adhesive, Tg, and/or mechanical properties. VersaRez 9100 is a very high quality, high purity, and low color (Clear) Epoxy…
Read more


2016-05-18 0

ChemShield 1787

ChemShield 1787 is a sprayable, 100% solids, high functionality, A.H.C. (Advanced Hybrid Cycloaliphatic) Phenolic Novolac Epoxy lining which exhibits excellent resistance to organic solvents, Chlorinated solvents and compounds, caustic environments, and acidic exposures. ChemShield 1787 is well suited for sewage pipe, treatment plants, petroleum refining and storage, and chemical plants. General Brochure Technical Data Sheet…
Read more


2016-05-17 0

ChemShield 1680

ChemShield 1680 is a thick-film, 100% solids reinforced, proprietary formulated AHC (Advanced Hybrid Cycloaliphatic) Epoxy Novolac based internal lining for chemical storage tanks. ChemShield 1680 is designed for corrosion control, chemical resistance, and abrasion resistance and can used for restoration and leak prevention of petroleum storage tank bottoms and pipelines where resistance to abrasion is…
Read more


2016-04-05 0

AntiCor 6020

AntiCor 6020 is an Inorganic Zinc Rich primer based on Alkyl Silicate technology. It can be used as a single coat for weathering protection, or can be applied as a primer when topcoated with Wolverine Coatings Corporation’s high quality topcoats. Its high zinc content guarantees a high performance system whether you choose an epoxy or…
Read more


2016-02-11 0

HybriShield 2101

HybriShield 2101 is a two component hybrid urethane exterior coating formulated to protect and decorate steel and iron substrates in a variety of environmental conditions. HybriShield 2101 has excellent weathering and gloss retention properties and is resistant to a variety of chemicals to which it may be exposed. HybriShield 2101 is intended for use in…
Read more


2016-02-11 0

AntiCor 1520

AntiCor 1520 is an Organic Zinc-Rich Solvent Based Epoxy primer. It is the primer of choice for highly corrosive environments. It was formulated to withstand many environments when topcoated with Wolverine Coatings Corporation’s high quality topcoats. Its 85% zinc content guarantees a high performance system whether you choose an epoxy or urethane topcoat, or an…
Read more


2016-02-11 0

ProtoCoat 1253

ProtoCoat 1253 is a high-quality coating that can be used with or without primer over steel, galvanized metal, aluminum and concrete. It bonds directly to steel or concrete. A single coat can out-perform several coats of alkyd coating. Two coats of this coating may be applied at one-hour intervals for a total of 15 mils…
Read more


2016-02-11 0

BondTite 1503

BondTite 1503 Primer is a unique three-component, Water-Reducible epoxy Primer and Bond Enhancer. This is accomplished by superior penetration and adhesion to the concrete slab. The coating’s uses include the priming of floors, manholes, sumps, and other concrete areas. BondTite 1503 has also has shown the ability to reduced moisture transmission in concrete slabs. Although,…
Read more


2016-01-05 0

IntegraFlex 1281

IntegraFlex 1281 is a 100% solids, two-component epoxy mastic which exhibits excellent adhesion and coating properties on steel, aluminum or other metals as well as concrete. The coating’s uses include the coating of machines, tools and other surfaces to provide excellent corrosion and abrasion resistance while maintaining a good level of flexibility. IntegraFlex 1281 also…
Read more


2015-12-07 0

ChemShield 1643

ChemShield 1643 is a thick-film, 100% solids, internally reinforced, proprietary formulated lining designed for corrosion control and abrasion resistance in chemical plants, and any other areas requiring excellent chemical and abrasion resistance in immersion conditions. ChemShield 1643 may also be used for restoration and leak prevention of storage tank bottoms and pipelines. ChemShield 1643 is…
Read more


2015-11-23 0

ChemShield 1813

ChemShield 1813 has been renamed to ChemShield 1713. Please review information for ChemShield 1713. General Brochure Technical Data Sheet (TDS) Safety Data Sheet (SDS) Part A Safety Data Sheet (SDS) Part B Architectural Specs APPLICATION DATA SUMMARY See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For…
Read more


2015-11-04 0

ChemShield 1837

ChemShield 1837 is a thick-film, internally reinforced 100% solids Glass Flake Filled, AHC High Functionality Phenolic Novolac based internal lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. This proprietary formulated lining may also be used for restoration and leak prevention of petroleum storage…
Read more


2015-09-29 0

ChemShield 1185

ChemShield 1185 is a thick-film, 100% solids reinforced, propriety formulated epoxy-based internal lining designed for corrosion control, restoration, and leak prevention of petroleum storage tank bottoms. ChemShield 1185 is spray-applied from 15-125 mils DFT depending on the extent of bottom plate corrosion, and is flexibilized to reduce coating stress resulting from mechanical and physical forces…
Read more


2015-08-18 0