ChemShield 1185

ChemShield 1185 is a tank lining with excellent resistance to hydrocarbons, oil & gas.

TECHNICAL DESCRIPTION

ChemShield 1185 is a thick-film, 100% solids reinforced, propriety formulated epoxy-based internal lining designed for corrosion control, restoration, and leak prevention of petroleum storage tank bottoms. ChemShield 1185 is spray-applied from 15-125 mils DFT depending on the extent of bottom plate corrosion, and is flexibilized to reduce coating stress resulting from mechanical and physical forces exerted on the tank bottom. ChemShield 1185 may also be used as a flexible base coat for chemical storage tank bottoms and for concrete containment areas. ChemShield 1185 is a two-component system; Resin and Hardener.

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.