IntegraFlex 1980

IntegraFlex 1980

IntegraFlex 1980 is a coating used to bridge severely cracked concrete surfaces.


   
Technical Data Sheet (TDS)
Safety Data Sheet (SDS) Part A
Safety Data Sheet (SDS) Part B
   

 

SIZE AVAILABILITY

  3 Quart Kit:
  Resin – 1 Gallon Can
  Hardener – 1 Quart Can
  3 Gallon Kit:
  Resin – 3.5 Gallon Pail
  Hardener – 1 Gallon Can
  15 Gallon Kit:
  Resin – (x2) 5 Gallon Pails
  Hardener – 5 Gallon Pail

 

TECHNICAL DESCRIPTION

IntegraFlex 1980 Crack Bridging Membrane is a 100% solids two-component polymer hybrid that will bridge severely cracked concrete surfaces. IntegraFlex 1980 has excellent flexibility and dimensional stability with exceptional adhesion characteristics. IntegraFlex 1980 provides an excellent bonding surface for other Wolverine Coatings Corporation products.


APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.