Secondary Containment

SECONDARY CONTAINMENT

Click the desired product name below to visit the product’s page to view information such as Technical Descriptions, Technical Data Sheets, and Safety Data Sheets.

For more coating and lining products, please see: Pipe and PipelinesChemical Storage Tanks

PRIMERS:

BondTite 1101

An epoxy primer which exhibits excellent adhesion and sealing properties on steel and concrete.

 

BondTite 1501

A water-reducible epoxy primer that can be applied to green concrete well within the typical 28 day curing period. If applied on concrete within 12 hours of the pour, it eliminates the need to shot blast and allows coating of the concrete the next day.

 

BondTite 1503

A water-reducible epoxy primer and bond enhancer that has the ability to reduce moisture transmission in concrete slabs.

 

BASE COATS:

BondTite 1114 

An epoxy adhesive which exhibits excellent adhesive properties on many substrates, and has been flexibilized to reduce coating stresses caused by expansion and contraction due to temperature change.

 

ChemShield 1185

A tank lining with excellent resistance to hydrocarbons, oil & gas.

 

ChemShield 1643

An internal lining designed for corrosion control and abrasion resistance in chemical plants, and any other areas requiring excellent chemical resistance in immersion conditions. It can be spray applied at 20-125 mils depending on the extent of corrosion.

 

ChemShield 1710

A binder that has excellent chemical resistance, which includes resistance to organic solvents, gasolines, caustic environments, and acidic exposures.

 

ChemShield 1731

A phenolic lining that exhibits resistance to an array of chemicals, including various concentrations of solvents, caustics, dilute organic acids, and inorganic acids. The integration of flakeglass reinforcement gives the coating excellent resistance to permeation, and is well suited for sewage pipe.

 

ChemShield 1734

A sprayable epoxy lining with excellent resistance to organic solvents, caustic environments, and dilute acidic exposures.

 

ChemShield 1737

A glass flake filled lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. It can be spray applied at 40-125 mils depending on the extent of corrosion.

 

ChemShield 1743

A lining designed for corrosion control and abrasion resistance in chemical plants, and any other areas requiring excellent chemical resistance in immersion conditions. It can be spray applied at 40-125 mils depending on the extent of corrosion.

 

ChemShield 1787

A lining with excellent resistance to organic solvents, chlorinated solvents and compounds, caustic environments, and acidic exposures.

 

ChemShield 1837

A glass flake filled lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. It can be spray applied at 40-125 mils depending on the extent of corrosion.

 

ChemShield 1887

An epoxy lining with resistance towards organic solvents, chlorinated solvents and compounds, caustic environments, and acidic exposures. Suited for sewage pipe, treatment plants, petroleum refining and storage, and chemical plants.

 

ChemShield 5201

A rapid curing coating that is chemical resistant for protection against general chemical exposures and immersion service. With special additives, ChemShield 5201 can be applied in temperatures as low as -30oF to +160oF.

 

LiquaTile 1143

A full ceramic, self-leveling epoxy floor coating used when resistance to organic solvents, caustic environments, and acidic exposures is desired.

 

LiquaTile 1143

A semi-ceramic, self-leveling epoxy floor coating used when resistance to organic solvents, caustic environments, and acidic exposures is desired.

 

TrowelEase 1162 PK

A four-component patching kit used to repair concrete. Specifically, it is used for epoxy overlays, repairing spalled concrete (holes), and resurfacing old or damaged concrete.

 

TrowelSand 211

An economical aggregate for resinous mortar systems.  It is a blend of fine quartz sands, and is typically combined with TrowelSand 271 to achieve a trowelable mix.

 

TrowelSand 245

A premium aggregate for resinous mortar systems.  It is a blend of various size quartz sands and troweling aides which compacts tightly for a stronger, more aesthetically pleasing appearance.

 

TrowelSand 250

A pre-blended, economical aggregate for resinous mortar systems.  It is a blend of 2 parts TrowelSand 211 to 1 part TrowelSand 271.

 

TrowelSand 271

An economical aggregate for resinous mortar systems.  It is a blend of extra fine quartz sands.  It is typically combined with TrowelSand 211 to achieve a trowelable mix.

 

VersaRez 9100

A resin that can be crosslinked with appropriate curing agents (hardeners) to produce desired properties such as chemical resistance, adhesive, and/or mechanical properties.