IntegraLock 1213
IntegraLock 1213 is an epoxy binder that functions as a high strength crack injection resin.
 |
Technical Data Sheet (TDS) |
|
Safety Data Sheet (SDS) Part A |
|
Safety Data Sheet (SDS) Part B |
SIZE AVAILABILITY
| 1 Gallon Kit: | |
| Resin – 1/2 Gallon Pail | |
| Hardener – 1/2 Gallon Pail | |
| 2 Gallon Kit: | |
| Resin – 1 Gallon Pail | |
| Hardener – 1 Gallon Pail |
TECHNICAL DESCRIPTION
IntegraLock 1213 is a 100% solids, high modulus, two-component, AHC (Advanced Hybrid Cycloaliphatic) epoxy binder which exhibits excellent adhesion and sealing properties on steel or concrete. The coating functions as a low viscosity, high modulus, and high strength crack injection resin. IntegraLock 1213 has tenacious adhesion to both wet or dry concrete. IntegraLock 1213 can also be used as a sealer, but will yellow under sunlight.
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.