LiquaTile 1172
LiquaTile 1172 is a 100% solids epoxy coating/lining designed as a protective barrier for properly prepared steel and concrete non-potable water storage tanks and pipes.
Note: LiquaTile 1172 no longer carries NSF/ANSI/CAN 61 or NSF/ANSI/CAN 372 certification, although the formulation has not changed. It is not recommended for potable water contact.
 |
Technical Data Sheet (TDS) |
|
Safety Data Sheet (SDS) Part A |
|
Safety Data Sheet (SDS) Part B |
|
Product Specification Guide (PSG) |
SIZE AVAILABILITY
| 3 Quart Kit: | |
| Resin – 1 Gallon Can | |
| Hardener – 1 Quart Can | |
| 3 Gallon Kit: | |
| Resin – 3.5 Gallon Pail | |
| Hardener – 1 Gallon Can | |
| 15 Gallon Kit: | |
| Resin – (x2) 5 Gallon Pails | |
| Hardener – 5 Gallon Pail |
TECHNICAL DESCRIPTION
LiquaTile 1172 is a 100% solids epoxy coating/lining designed as a protective barrier for properly prepared steel and concrete non-potable water storage tanks and pipes.
LiquaTile 1172 no longer carries NSF/ANSI/CAN 61 or NSF/ANSI/CAN 372 certification, although the formulation has not changed. It is not recommended for potable water contact.
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.